[LinuxPPS] Motherboards with decent Xtals.

[Thorsten Mühlfelder]

Take a look at:
http://www.febo.com/pages/soekris/
and:
http://www.tapr.org/kits_clock-block.html

You can use your rubidium with a frequency mulitplier as pci clock.


On Wed, 12 Nov 2008 00:02:49 -0700
clemens at dwf.com wrote:

> 
> Well, when I say a 'good Xtal' I would imply a AT cut crystal with a 
> temperature
> minimum close to what is expected in a Computer case.
> 
> But, I do have a Rubidium Standard here (and it cost a lot less than you would
> suggest), and it is that that I would consider using if it were possible.
> -- 
>                                         Reg.Clemens
>                                         reg at dwf.com
> 
> 
> 
> _______________________________________________
> LinuxPPS mailing list
> LinuxPPS at ml.enneenne.com
> http://ml.enneenne.com/cgi-bin/mailman/listinfo/linuxpps
> Wiki: http://wiki.enneenne.com/index.php/LinuxPPS_support