[LinuxPPS] RIPE NCC interface: needing help

[Kiss Gabor (Bitman)]

> On 2010-05-21 16:14, Kiss Gabor (Bitman) wrote:
> > server 127.127.22.0
> > fudge 127.127.22.0 time1 0.020
> 
> Where is the local clock?
> server  127.127.1.0     # local clock
> fudge   127.127.1.0 stratum 15

:-)
Good idea. (Actually I had no example configuration to copy.)

> Where is the NMEA data coming from, or any other reference that ntpd can
> use to reference a time stamp to a pps-event?

Now other ntp server is configured also.

However NMEA sentences are not available.
I have a Trimble Acutime 2000 receiver that speaks TSIP (Trimble
Standard Interface Protocol) this is why I wanted to use ntpd driver 43
(RIPE NCC interface for Trimble Palisade).
Yes, the device could be reconfigured to use NMEA but
at this moment I have no possibility to do this.
Moreover the User's Guide states:
  Port B can also be configured to transmit NMEA packets, but these
  packets are not guaranteed to be sent within 30 milliseconds after the
  PPS output.
Therefore I want to use TSIP anyway.
I'll hack driver 43 to use the actual LinuxPPS API.

Well. Thanks again for your patience. :-)
Have a nice weekend.

Cheers

Gabor