<html>
<head>
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style></head>
<body class='hmmessage'><div dir='ltr'>
Hi all,<br><br><font style="" face="Arial">I have been struggling to get PPS from a Garmin GPS to feed into NTPD via LinuxPPS on an ARM board. I have followed the instructions on the LinuxPPS wiki and everything looks good up until I run the ppstest program. No PPS pulses are detected (and the /sys/class/pps/pp0/assert and clear files only have one line in them full of zeros). If I put an LED on the GPS PPS line, then I can see the pulses coming in, so that bit is working. Also, if I load the ktimer module, then ppstest works fine. After some digging around, I discovered that the serial port that I am using is being run by a SC16IS7X2 driver (which apparently is some type of i2c to serial converter). Is that likely to be my problem and if so, is there any hope?!<br><br>Thanks a lot,<br>Nial</font><font style="" face="Arial"><code><br><br><br></code></font> </div></body>
</html>