LinuxPPS

User Tools

Site Tools

Trace:
technical_information

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
technical_information [2025/02/24 09:02] – [Generators] giomettitechnical_information [2025/02/24 09:02] (current) – [Parallel port generator] giometti
Line 175: Line 175:
 ===== Generators SYSFS support ===== ===== Generators SYSFS support =====
  
-If the SYSFS filesystem is enabled in the kernel it provides a new class::+If the SYSFS filesystem is enabled in the kernel it provides a new class:
  
     $ ls /sys/class/pps-gen/     $ ls /sys/class/pps-gen/
Line 181: Line 181:
  
 Every directory is the ID of a PPS generator defined in the system and Every directory is the ID of a PPS generator defined in the system and
-inside of it you find several files::+inside of it you find several files:
  
     $ ls -F /sys/class/pps-gen/pps-gen0/     $ ls -F /sys/class/pps-gen/pps-gen0/
     dev  enable  name  power/  subsystem@  system  time  uevent     dev  enable  name  power/  subsystem@  system  time  uevent
  
-To enable the PPS signal generation you can use the command below::+To enable the PPS signal generation you can use the command below:
  
     $ echo 1 > /sys/class/pps-gen/pps-gen0/enable     $ echo 1 > /sys/class/pps-gen/pps-gen0/enable
Line 198: Line 198:
 ports, for example. ports, for example.
  
-Parallel port cable pinout::+Parallel port cable pinout:
  
         pin     name    master      slave         pin     name    master      slave
technical_information.1740387745.txt.gz · Last modified: by giometti