[LinuxPPS] [Fwd: Re: Oncore]

[clemens at dwf.com]

> I do notice on your schematic that you invert the transmit and receive
> data. Is this required? I just had it buffered with no inversion.
> 
Im not sure about the transmit side, mabe this is a difference in the 
definition of 1/0 for tty vs ttl.
But for the receive side, this is just what I was pointing at when I said
that you have to test to see if you want to use ASSERT or CLEAR.
-- 
                                        Reg.Clemens
                                        reg at dwf.com